SIT/SAT Ballistic Shield

Traditionally, convoy courses have been minimized by fixed target positions which gunners can spot and be prepared for. With Patriot's Convoy Live-Fire Shields, you merely position your lifter, place the Live-Fire Shield on it, conceal with brush, branches, tumbleweeds, sand, etc. if desired to blend it in to the surrounding terrain, and begin fire. This renders the target point virtually undetectable and thereby creates a realistic reaction and response under simulated combat conditions.

Specification sheet


Ballistic Shield 3-sided Shield

#PAR-7623S

General Protection Shield for Sensitive Items. Easy carry internal foldaway handles cannot be shot off like external handles. Free floating facial shield construction - no weld stress breaking and cracking. This ballistic shield allows you to locate and relocate your sensitive products for various training scenarios for maximum training impact. Safely protects your sensitive items up to and including 5.56/7.62 ammunition.

View GSA Listing

7.62/5.56 Ball Ballistic Shield / Single SIT

#PAR-762

Modular or Welded Construction
36"L X 22.5"W X 14"H (IN), Wt. 160#

View GSA Listing

Ballistic Rubber Kit - Vulcanized

#PAR-BRSK

2" Vulcanized Ballistic Rubber that mounts to and encapsulates the Ballistic Shield for additional safety and ricochet protection. Sized to fit any model of SIT/SAT Ballistic Shield.

View GSA Listing

50 Cal. Ball Ballistic Shield / Single SIT

#PAR-50B

Modular or Welded Construction
36"L X 22.5"W X 14"H (IN), Wt. 245#

View GSA Listing

50 Cal. Ball Auto/Sniper AP Rounds Ballistic Shield / Single SIT

#PAR-50ABS

Modular or Welded Construction
36"L X 22.5"W X 14"H (IN), Wt. 275#

View GSA Listing

50 Cal. AP Auto-Fire Rounds Ballistic Shield / Single SIT

#PAR-50AAP

Modular or Welded Construction
36"L X 22.5"W X 14"H (IN), Wt. 325#

View GSA Listing

50 cal. BMG Machine Gun Ballistic Shield Double SIT

#PDW-10050B

Machine Gun Range Emplacement Convoy Live Fire / Protection Shield. Encloses the infantry lifter for 3-sided protection. Lifting eyes for easy relocation. Free floating facial shield construction - no weld stress breaking and cracking. This ballistic shield allows you to locate and relocate your SITS in various training scenarios for maximum training impact. The shield simply covers and encloses the infantry lifter and is mobile for these scenarios. Safely protects your Double SITS up to .50 Cal Ball Auto-Fire.

View GSA Listing

Modular Assault Course Shield

#PAR-MAC

Modular Assault Course 5.56/7.62MM Level Protection. High Angle Sides. Easy carry internal foldaway handles cannot be shot off like external handles. Free floating facial shield construction - no weld stress breaking and cracking. This ballistic shield allows you to locate and relocate your SIT in various MAC training scenarios for maximum training impact. The shield simply covers and encloses the infantry lifter and is mobile for these scenarios. Safely protects your Single SIT up to and including 5.56/7.62 ammunition and under.

View GSA Listing

EPRubber SIT/SAT Coffin Protector

#PP-EPRSC

SIT/SAT Coffin Shield replaces concrete and timber construction against the Enhanced Performance Round. Our new concept in special Vulcanized Ballistic Rubber called EPRubber™ stops and holds the new EPR round dead in its tracks. The EPRubber™ outperforms all other ballistic rubber products tested against it. Backed with Patriots hot dip galvanized premium Denshield™ Rifle Grade Steel, your coffin berms will be safe from harm and last for years. A single assembly drop-in solution that can be installed quickly with unit assets, or we can install.

View GSA Listing

SIT Ballistic Protection Shield and Sub-plate Assembly

#PAR-PTA-S

22" High x 60" Wide x 58 1/4" Deep

SIT ballistic protection shield with sub-plate assembly that provides full ballistic protection to SITs, battery-powered SITs, and solar-powered SITs. The ballistic shield provides full ballistic protection on the front and both sides of a solar powered SIT and all its peripherals, as well as the sub-plate. Frontal 45-degree angled face deflects ricochets down range, and away from the shooter. Modular construction with simple field assembly. Protects up to and including 7.62 rounds. Adjustable 1"-5" height, 40"x40" sub-plate included. Manufactured from abrasion resistant (AR) 500 steel with proprietary frontal flex-plate.

View GSA Listing

Ballistic Protection Shield and Sub-Plate Assembly with 2" Vulcanized Ballistic Rubber

#PAR-PTA-SBR

22" High x 64" Wide x 60"

SIT ballistic protection shield with sub-plate assembly that provides full ballistic protection to SITs, battery-powered SITs, and solar-powered SITs. The ballistic shield provides full ballistic protection on the front and both sides of a solar powered SIT and all its peripherals, as well as the sub-plate. Frontal 45-degree angled face deflects ricochets down range, and away from the shooter. Modular construction with simple field assembly. Protects up to and including 7.62 rounds. Adjustable 1"-5" height, 40"x40" sub-plate included. Encased with Patriot's UV resistant, environmentally friendly and fire retardant Vulcanized Ballistic Rubber to capture rounds and prohibit ricochets. Manufactured from abrasion resistant (AR) 500 steel with proprietary frontal flex-plate.

View GSA Listing

Small Ballistic Shield 7.62/5.56 / Single SIT

#PAR-76218

36"L X 22.5"W X 18"H (IN), Wt. 180#

SIT ballistic protection shield fully protects the single SIT and its peripherals in the exposed and concealed position up to and including 7.62 rounds. Includes lifting handles or holes. Manufactured from abrasion resistant (AR) 500 steel with proprietary frontal flex plate.

View GSA Listing

Small Ballistic Shield 7.62/5.56 / Single SIT with 2" Vulcanized Ballistic Rubber

#PAR-76218

36"L X 22.5"W X 18"H (IN), Wt. 250#

SIT ballistic protection shield fully protects the single SIT and its peripherals in the exposed and concealed position up to and including 7.62 rounds. Includes lifting handles or holes. Encased with Patriot's UV resistant, environmentally friendly and fire retardant Vulcanized Ballistic Rubber to capture rounds and prohibit ricochets. Manufactured from abrasion resistant (AR) 500 steel with proprietary frontal flex-plate.

View GSA Listing

Ballistic Rubber Panel

#PAR-2424

Vulcanized fire-resistant ballistic rubber panel is 20% more dense than traditional particulate panels. Edges do not crumble and break. Used for protection to help prevent ricochet and splatter of rounds back to shooter. Protects up to .308/7.62 rounds and under. Panel has offset edging to allow overlap to prevent edge to edge seams that allows rounds to return back the shooter.

View GSA Listing

Ballistic Rubber Block

#PAR-8816; 8" X 8" X 16" Weight 41#

#PAR-91224; 9" X 12" X 24" Weight 105#

#PAR-91236; 9" X 12" X 36" Weight 160#

>Vulcanized Sight Block is a sand bag alternative to traditional sandbags. Gives the shooter the capability to reposition three different heights to zero-in weapons. Vulcanized rubber construction with UV Protection for outdoor use will not crumble or break.

View GSA Listing